West Side Scribner (NWLRAG) LOG RULE

Log Scaling On Android Allegro 3

West Side Scribner (NWLRAG) Log Rule

The West Side Scribner (NWLRAG) Log Rule is Table Based Rule

Here is an explanation from the NWNLRAG's "Supplement to Official Log Scaling and Grading Rules"

"In Scribner's original log scale volume tables only a small group of log diameters were extended, approximately 12" to 30". As smaller and larger logs were encountered the volume tables were extended to embrace more diameters. By 1912, when the Scribner Log Scale Rule was approved by the U.S. Forest Service use, its volume table had grown to include log diameters from 6" to 44", inclusive. It is easy to realize and understand that down through the years various persons, or groups, have had a hand in extending the volume table additionally. Intermittent controversy or mis-calculation regarding the procedure for such extensions apparently introduced some small errors into parts of the volume table. The entire problem was taken under consideration by the NLRAG in 1970. An intensive data computer study was arranged with the NLRAG-affiliated members and the Scaling Bureaus, U.S. Forest Service and other public timber agencies, plus the excellent co-operative assistance of the Pacific Northwest Forest and Range Experiment Station with co-ordinated and analyzed the input. The end-result of this concerted effort cleared up the scattered irregularities in the volume table and devised a tabulation showing a "factor" for each log diameter from 1" to 120". This "factor" is simply the number of board feet of log scale in a single lineal foot of log length for each diameter in the table. Consequently, each diameter factor is shown in board-feet to the nearest one thousandth of a foot, and this figure needs only to be multiplies by the number of lineal feet, not exceeding 40', in any given log to arrive directly at a figure which, when "rounded to the nearest ten", will be the Scribner board-foot scale volume. This "factor" system was approved by NLRAG and recommended for use by all member-organizations, effective Jul1, 1972."

Here are the factors. You don't need to use a table lookup to use the factors. Merely multiply the factor by the log length (for logs 40' and under) to obtain the board footage. You can then apply whatever rounding rule you need, such as Decimal 10.

Length	Diameter	Factor
	1	0.000
1'	2	0.143
thru	3	0.390
40'	4	0.676
	5	1.070

	6	1.160
1'	7	1.400
thru	8	1.501
15'	9	2.084
	10	3.126
	11	3.749

	6	1.249
16'	7	1.608
thru	8	1.854
31'	9	2.410
	10	3.542
	11	4.167

	6	1.570
32'	7	1.800
thru	8	2.200
40'	9	2.900
	10	3.815
	11	4.499
	12	4.900
	13	6.043
	14	7.140
	15	8.880
	16	10.000
	17	11.528
	18	13.290
	19	14.990
	20	17.499
	21	18.990
	22	20.880
	23	23.510
	24	25.218
	25	28.677
	26	31.249
	27	34.220
	28	36.376
	29	38.040
	30	41.060
	31	44.376
	32	45.975
	33	48.990
	34	50.000
	35	54.688
	36	57.660
	37	64.319
	38	66.731
	39	70.000
	40	75.240
	41	79.480
	42	83.910
	43	87.190
	44	92.501
	45	94.990
	46	99.075
	47	103.501
	48	107.970
	49	112.292
	50	116.990
	51	121.650
	52	126.525
	53	131.510
	54	136.510
	55	141.610
	56	146.912
	57	152.210
	58	157.710
	59	163.288
	60	168.990
	61	174.850
	62	180.749
	63	186.623
	64	193.170
	65	199.120
	66	205.685
	67	211.810
	68	218.501
	69	225.685
	70	232.499
	71	239.317
	72	246.615
	73	254.040
	74	261.525
	75	269.040
	76	276.630
	77	284.260
	78	292.501
	79	300.655
	80	308.970
	81	317.360
	82	325.790
	83	334.217
	84	343.290
	85	350.785
	86	359.120
	87	368.380
	88	376.610
	89	385.135
	90	393.380
	91	402.499
	92	410.834
	93	419.166
	94	428.380
	95	437.499
	96	446.565
	97	455.010
	98	464.150
	99	473.430
	100	482.490
	101	491.700
	102	501.700
	103	511.700
	104	521.700
	105	531.700
	106	541.700
	107	552.499
	108	562.501
	109	573.350
	110	583.350
	111	594.150
	112	604.170
	113	615.010
	114	625.890
	115	636.660
	116	648.380
	117	660.000
	118	671.700
	119	683.330
	120	695.011

Here is the raw data table

Len/Diam	1"	2"	3"	4"	5"	6"	7"	8"	9"	10"	11"	12"	13"	14"	15"	16"
1'	0	0	0	0	0	0	0	0	0	0	0	0	10	10	10	10
2'	0	0	0	0	0	0	0	0	0	10	10	10	10	10	20	20
3'	0	0	0	0	0	0	0	0	10	10	10	10	20	20	30	30
4'	0	0	0	0	0	0	10	10	10	10	10	20	20	30	40	40
5'	0	0	0	0	10	10	10	10	10	20	20	20	30	40	40	50
6'	0	0	0	0	10	10	10	10	10	20	20	30	40	40	50	60
7'	0	0	0	0	10	10	10	10	10	20	30	30	40	50	60	70
8'	0	0	0	10	10	10	10	10	20	30	30	40	50	60	70	80
9'	0	0	0	10	10	10	10	10	20	30	30	40	50	60	80	90
10'	0	0	0	10	10	10	10	20	20	30	40	50	60	70	90	100
11'	0	0	0	10	10	10	20	20	20	30	40	50	70	80	100	110
12'	0	0	0	10	10	10	20	20	30	40	40	60	70	90	110	120
13'	0	0	10	10	10	20	20	20	30	40	50	60	80	90	120	130
14'	0	0	10	10	10	20	20	20	30	40	50	70	80	100	120	140
15'	0	0	10	10	20	20	20	20	30	50	60	70	90	110	130	150
16'	0	0	10	10	20	20	30	30	40	60	70	80	100	110	140	160
17'	0	0	10	10	20	20	30	30	40	60	70	80	100	120	150	170
18'	0	0	10	10	20	20	30	30	40	60	80	90	110	130	160	180
19'	0	0	10	10	20	20	30	40	50	70	80	90	110	140	170	190
20'	0	0	10	10	20	20	30	40	50	70	80	100	120	140	180	200
21'	0	0	10	10	20	30	30	40	50	70	90	100	130	150	190	210
22'	0	0	10	10	20	30	40	40	50	80	90	110	130	160	200	220
23'	0	0	10	20	20	30	40	40	60	80	100	110	140	160	200	230
24'	0	0	10	20	30	30	40	40	60	90	100	120	150	170	210	240
25'	0	0	10	20	30	30	40	50	60	90	100	120	150	180	220	250
26'	0	0	10	20	30	30	40	50	60	90	110	130	160	190	230	260
26'	0	0	10	20	30	30	40	50	70	100	110	130	160	190	240	270
28'	0	0	10	20	30	30	50	50	70	100	120	140	170	200	250	280
29'	0	0	10	20	30	40	50	50	70	100	120	140	180	210	260	290
30'	0	0	10	20	30	40	50	60	70	110	130	150	180	210	270	300
31'	0	0	10	20	30	40	50	60	70	110	130	150	190	220	280	310
32'	0	0	10	20	30	50	60	70	90	120	140	160	190	230	280	320
33'	0	0	10	20	40	50	60	70	100	130	150	160	200	240	290	330
34'	0	0	10	20	40	50	60	70	100	130	150	170	210	240	300	340
35'	0	10	10	20	40	50	60	80	100	130	160	170	210	250	310	350
36'	0	10	10	20	40	60	60	80	100	140	160	180	220	260	320	360
37'	0	10	10	30	40	60	70	80	110	140	170	180	220	260	330	370
38'	0	10	10	30	40	60	70	80	110	140	170	190	230	270	340	380
39'	0	10	20	30	40	60	70	90	110	150	180	190	240	280	350	390
40'	0	10	20	30	40	60	70	90	120	150	180	200	240	290	360	400

Len/Diam	17"	18"	19"	20"	21"	22"	23"	24"	25"	26'	27"	28"	29"	30"	31"	32"
1'	10	10	10	20	20	20	20	30	30	30	30	40	40	40	40	50
2'	20	30	30	30	40	40	50	50	60	60	70	70	80	80	90	90
3'	30	40	40	50	60	60	70	80	90	90	100	110	110	120	130	140
4'	50	50	60	70	80	80	90	100	110	120	140	150	150	160	180	180
5'	60	70	70	90	90	100	120	130	140	160	170	180	190	210	220	230
6'	70	80	90	100	110	130	140	150	170	190	210	220	230	250	270	280
7'	80	90	100	120	130	150	160	180	200	220	240	250	270	290	310	320
8'	90	110	120	140	150	170	190	200	230	250	270	290	300	330	360	370
9'	100	120	130	160	170	190	210	230	260	280	310	330	340	370	400	410
10'	120	130	150	170	190	210	240	250	290	310	340	360	380	410	440	460
11'	130	150	160	190	210	230	260	280	320	340	380	400	420	450	490	510
12'	140	160	180	210	230	250	280	300	340	370	410	440	460	490	530	550
13'	150	170	190	230	250	270	310	330	370	410	440	470	490	530	580	600
14'	160	190	210	240	270	290	330	350	400	440	480	510	530	570	620	640
15'	170	200	220	260	280	310	350	380	430	470	510	550	570	620	670	690
16'	180	210	240	280	300	330	380	400	460	500	550	580	610	660	710	740
17'	200	230	250	300	320	350	400	430	490	530	580	620	650	700	750	780
18'	210	240	270	310	340	380	420	450	520	560	620	650	680	740	800	830
19'	220	250	280	330	360	400	450	480	540	590	650	690	720	780	840	870
20'	230	270	300	350	380	420	470	500	570	620	680	730	760	820	890	920
21'	240	280	310	370	400	440	490	530	600	660	720	760	800	860	930	970
22'	250	290	330	380	420	460	520	550	630	690	750	800	840	900	980	1010
23'	270	310	340	400	440	480	540	580	660	720	790	840	870	940	1020	1060
24'	280	320	360	420	460	500	560	610	690	750	820	870	910	990	1070	1100
25'	290	330	370	440	470	520	590	630	720	780	860	910	950	1030	1110	1150
26'	300	350	390	450	490	540	610	660	750	810	890	950	990	1070	1150	1200
26'	310	360	400	470	510	560	630	680	770	840	920	980	1030	1110	1200	1240
28'	320	370	420	490	530	580	660	710	800	870	960	1020	1070	1150	1240	1290
29'	330	390	430	510	550	610	680	730	830	910	990	1050	1100	1190	1290	1330
30'	350	400	450	520	570	630	710	760	860	940	1030	1090	1140	1230	1330	1380
31'	360	410	460	540	590	650	730	780	890	970	1060	1130	1180	1270	1380	1430
32'	370	430	480	560	610	670	750	810	920	1000	1100	1160	1220	1310	1420	1470
33'	380	440	490	580	630	690	780	830	950	1030	1130	1200	1260	1350	1460	1520
34'	390	450	510	590	650	710	800	860	980	1060	1160	1240	1290	1400	1510	1560
35'	400	470	520	610	660	730	820	880	1000	1090	1200	1270	1330	1440	1550	1610
36'	420	480	540	630	680	750	850	910	1030	1120	1230	1310	1370	1480	1600	1660
37'	430	490	550	650	700	770	870	930	1060	1160	1270	1350	1410	1520	1640	1700
38'	440	510	570	660	720	790	890	960	1090	1190	1300	1380	1450	1560	1690	1750
39'	450	520	580	680	740	810	920	980	1120	1220	1330	1420	1480	1600	1730	1790
40'	460	530	600	700	760	840	940	1010	1150	1250	1370	1460	1520	1640	1780	1840

Len/Diam	33"	34"	35"	36"	37"	38"	39"	40"	41"	42"	43"	44"	45"	46"	47"
1'	50	50	50	60	60	70	70	80	80	80	90	90	90	100	100
2'	100	100	110	120	130	130	140	150	160	170	170	190	190	200	210
3'	150	150	160	170	190	200	210	230	240	250	260	280	280	300	310
4'	200	200	220	230	260	270	280	300	320	340	350	370	380	400	410
5'	240	250	270	290	320	330	350	380	400	420	440	460	470	500	520
6'	290	300	330	350	390	400	420	450	480	500	520	560	570	590	620
7'	340	350	380	400	450	470	490	530	560	590	610	650	660	690	720
8'	390	400	440	460	510	530	560	600	640	670	700	740	760	790	830
9'	440	450	490	520	580	600	630	680	720	760	780	830	850	890	930
10'	490	500	550	580	640	670	700	750	790	840	870	930	950	990	1040
11'	540	550	600	630	710	730	770	830	870	920	960	1020	1040	1090	1140
12'	590	600	660	690	770	800	840	900	950	1010	1050	1110	1140	1190	1240
13'	640	650	710	750	840	870	910	980	1030	1090	1130	1200	1230	1290	1350
14'	690	700	770	810	900	930	980	1050	1110	1170	1220	1300	1330	1390	1450
15'	730	750	820	860	960	1000	1050	1130	1190	1260	1310	1390	1420	1490	1550
16'	780	800	880	920	1030	1070	1120	1200	1270	1340	1400	1480	1520	1590	1660
17'	830	850	930	980	1090	1130	1190	1280	1350	1430	1480	1570	1610	1680	1760
18'	880	900	980	1040	1160	1200	1260	1350	1430	1510	1570	1670	1710	1780	1860
19'	930	950	1040	1100	1220	1270	1330	1430	1510	1590	1660	1760	1800	1880	1970
20'	980	1000	1090	1150	1290	1330	1400	1500	1590	1680	1740	1850	1900	1980	2070
21'	1030	1050	1150	1210	1350	1400	1470	1580	1670	1760	1830	1940	1990	2080	2170
22'	1080	1100	1200	1270	1420	1470	1540	1660	1750	1850	1920	2040	2090	2180	2280
23'	1130	1150	1260	1330	1480	1530	1610	1730	1830	1930	2010	2130	2180	2280	2380
24'	1180	1200	1310	1380	1540	1600	1680	1810	1910	2010	2090	2220	2280	2380	2480
25'	1220	1250	1370	1440	1610	1670	1750	1880	1990	2100	2180	2310	2370	2480	2590
26'	1270	1300	1420	1500	1670	1740	1820	1960	2070	2180	2270	2410	2470	2580	2690
26'	1320	1350	1480	1560	1740	1800	1890	2030	2150	2270	2350	2500	2560	2680	2790
28'	1370	1400	1530	1610	1800	1870	1960	2110	2230	2350	2440	2590	2660	2770	2900
29'	1420	1450	1590	1670	1870	1940	2030	2180	2300	2430	2530	2680	2750	2870	3000
30'	1470	1500	1640	1730	1930	2000	2100	2260	2380	2520	2620	2780	2850	2970	3110
31'	1520	1550	1700	1790	1990	2070	2170	2330	2460	2600	2700	2870	2940	3070	3210
32'	1570	1600	1750	1850	2060	2140	2240	2410	2540	2690	2790	2960	3040	3170	3310
33'	1620	1650	1800	1900	2120	2200	2310	2480	2620	2770	2880	3050	3130	3270	3420
34'	1670	1700	1860	1960	2190	2270	2380	2560	2700	2850	2960	3150	3230	3370	3520
35'	1710	1750	1910	2020	2250	2340	2450	2630	2780	2940	3050	3240	3320	3470	3620
36'	1760	1800	1970	2080	2320	2400	2520	2710	2860	3020	3140	3330	3420	3570	3730
37'	1810	1850	2020	2130	2380	2470	2590	2780	2940	3100	3230	3420	3510	3670	3830
38'	1860	1900	2080	2190	2440	2540	2660	2860	3020	3190	3310	3520	3610	3760	3930
39'	1910	1950	2130	2250	2510	2600	2730	2930	3100	3270	3400	3610	3700	3860	4040
40'	1960	2000	2190	2310	2570	2670	2800	3010	3180	3360	3490	3700	3800	3960	4140

Len/Diam	48"	49"	50"	51"	52"	53"	54"	55"	56"	57"	58"	59"	60"
1'	110	110	120	120	130	130	140	140	150	150	160	160	170
2'	220	220	230	240	250	260	270	280	290	300	320	330	340
3'	320	340	350	360	380	390	410	420	440	460	470	490	510
4'	430	450	470	490	510	530	550	570	590	610	630	650	680
5'	540	560	580	610	630	660	680	710	730	760	790	820	840
6'	650	670	700	730	760	790	820	850	880	910	950	980	1010
7'	760	790	820	850	890	920	960	990	1030	1070	1100	1140	1180
8'	860	900	940	970	1010	1050	1090	1130	1180	1220	1260	1310	1350
9'	970	1010	1050	1090	1140	1180	1230	1270	1320	1370	1420	1470	1520
10'	1080	1120	1170	1220	1270	1320	1370	1420	1470	1520	1580	1630	1690
11'	1190	1240	1290	1340	1390	1450	1500	1560	1620	1670	1730	1800	1860
12'	1300	1350	1400	1460	1520	1580	1640	1700	1760	1830	1890	1960	2030
13'	1400	1460	1520	1580	1640	1710	1770	1840	1910	1980	2050	2120	2200
14'	1510	1570	1640	1700	1770	1840	1910	1980	2060	2130	2210	2290	2370
15'	1620	1680	1750	1820	1900	1970	2050	2120	2200	2280	2370	2450	2530
16'	1730	1800	1870	1950	2020	2100	2180	2270	2350	2440	2520	2610	2700
17'	1840	1910	1990	2070	2150	2240	2320	2410	2500	2590	2680	2780	2870
18'	1940	2020	2110	2190	2280	2370	2460	2550	2640	2740	2840	2940	3040
19'	2050	2130	2220	2310	2400	2500	2590	2690	2790	2890	3000	3100	3210
20'	2160	2250	2340	2430	2530	2630	2730	2830	2940	3040	3150	3270	3380
21'	2270	2360	2460	2550	2660	2760	2870	2970	3090	3200	3310	3430	3550
22'	2380	2470	2570	2680	2780	2890	3000	3120	3230	3350	3470	3590	3720
23'	2480	2580	2690	2800	2910	3020	3140	3260	3380	3500	3630	3760	3890
24'	2590	2700	2810	2920	3040	3160	3280	3400	3530	3650	3790	3920	4060
25'	2700	2810	2920	3040	3160	3290	3410	3540	3670	3810	3940	4080	4220
26'	2810	2920	3040	3160	3290	3420	3550	3680	3820	3960	4100	4250	4390
26'	2920	3030	3160	3280	3420	3550	3690	3820	3970	4110	4260	4410	4560
28'	3020	3140	3280	3410	3540	3680	3820	3970	4110	4260	4420	4570	4730
29'	3130	3260	3390	3530	3670	3810	3960	4110	4260	4410	4570	4740	4900
30'	3240	3370	3510	3650	3800	3950	4100	4250	4410	4570	4730	4900	5070
31'	3350	3480	3630	3770	3920	4080	4230	4390	4550	4720	4890	5060	5240
32'	3460	3590	3740	3890	4050	4210	4370	4530	4700	4870	5050	5230	5410
33'	3560	3710	3860	4010	4180	4340	4500	4670	4850	5020	5200	5390	5580
34'	3670	3820	3980	4140	4300	4470	4640	4810	5000	5180	5360	5550	5750
35'	3780	3930	4090	4260	4430	4600	4780	4960	5140	5330	5520	5720	5910
36'	3890	4040	4210	4380	4550	4730	4910	5100	5290	5480	5680	5880	6080
37'	3990	4150	4330	4500	4680	4870	5050	5240	5440	5630	5840	6040	6250
38'	4100	4270	4450	4620	4810	5000	5190	5380	5580	5780	5990	6200	6420
39'	4210	4380	4560	4740	4930	5130	5320	5520	5730	5940	6150	6370	6590
40'	4320	4490	4680	4870	5060	5260	5460	5660	5880	6090	6310	6530	6760

For logs over 40' in length, the rules require logs to be scaled in segments.
The guiding rule here is:

Logs longer than 40' "will necessitate such "LONG LOGS" to be divided into 2, 3, or 4 segments, respectively, automatically giving the log 2, 3, or 4 scaling cylinders divided as nearly as possible into even lengths of 2-foot multiples. If the required number of segments in a long-log cannot be divided into equal lengths the longest segment(s) shall be on the small end of the log and the shortest segment(s) shall be on the large end of the log."

This is opposite of the East Side rule of

"When logs exceed the maximum scaling length, scale them as two or more segments as nearly the same 2-foot length as practicable. When it is necessary to divide a log into unequal lengths, make the butt segment(s) the longest."

Length	# of Segments	Butt Segment	Segment #2	Segment #3	Segment #4
5	1	5	0	0	0
6	1	6	0	0	0
7	1	7	0	0	0
8	1	8	0	0	0
9	1	9	0	0	0
10	1	10	0	0	0
11	1	11	0	0	0
12	1	12	0	0	0
13	1	13	0	0	0
14	1	14	0	0	0
15	1	15	0	0	0
16	1	16	0	0	0
17	1	17	0	0	0
18	1	18	0	0	0
19	1	19	0	0	0
20	1	20	0	0	0
21	1	21	0	0	0
22	1	22	0	0	0
23	1	23	0	0	0
24	1	24	0	0	0
25	1	25	0	0	0
26	1	26	0	0	0
27	1	27	0	0	0
28	1	28	0	0	0
29	1	29	0	0	0
30	1	30	0	0	0
31	1	31	0	0	0
32	1	32	0	0	0
33	1	33	0	0	0
34	1	34	0	0	0
35	1	35	0	0	0
36	1	36	0	0	0
37	1	37	0	0	0
38	1	38	0	0	0
39	1	39	0	0	0
40	1	40	0	0	0
41	2	20	21	0	0
42	2	20	22	0	0
43	2	21	22	0	0
44	2	22	22	0	0
45	2	22	23	0	0
46	2	22	24	0	0
47	2	23	24	0	0
48	2	24	24	0	0
49	2	24	25	0	0
50	2	24	26	0	0
51	2	25	26	0	0
52	2	26	26	0	0
53	2	26	27	0	0
54	2	26	28	0	0
55	2	27	28	0	0
56	2	28	28	0	0
57	2	28	29	0	0
58	2	28	30	0	0
59	2	29	30	0	0
60	2	30	30	0	0
61	2	30	31	0	0
62	2	30	32	0	0
63	2	31	32	0	0
64	2	32	32	0	0
65	2	32	33	0	0
66	2	32	34	0	0
67	2	33	34	0	0
68	2	34	34	0	0
69	2	34	35	0	0
70	2	34	36	0	0
71	2	35	36	0	0
72	2	36	36	0	0
73	2	36	37	0	0
74	2	36	38	0	0
75	2	37	38	0	0
76	2	38	38	0	0
77	2	38	39	0	0
78	2	38	40	0	0
79	2	39	40	0	0
80	2	40	40	0	0
81	3	26	27	28	0
82	3	26	28	28	0
83	3	27	28	28	0
84	3	28	28	28	0
85	3	28	28	29	0
86	3	28	28	30	0
87	3	28	29	30	0
88	3	28	30	30	0
89	3	29	30	30	0
90	3	30	30	30	0
91	3	30	30	31	0
92	3	30	30	32	0
93	3	30	31	32	0
94	3	30	32	32	0
95	3	31	32	32	0
96	3	32	32	32	0
97	3	32	32	33	0
98	3	32	32	34	0
99	3	32	33	34	0
100	3	32	34	34	0
101	3	33	34	34	0
102	3	34	34	34	0
103	3	34	34	35	0
104	3	34	34	36	0
105	3	34	35	36	0
106	3	34	36	36	0
107	3	35	36	36	0
108	3	36	36	36	0
109	3	36	36	37	0
110	3	36	36	38	0
111	3	36	37	38	0
112	3	36	38	38	0
113	3	37	38	38	0
114	3	38	38	38	0
115	3	38	38	39	0
116	3	38	38	40	0
117	3	38	39	40	0
118	3	38	40	40	0
119	3	39	40	40	0
120	4	40	40	40	0
121	4	30	30	30	31
122	4	30	30	30	32
123	4	30	30	31	32
124	4	30	30	32	32
125	4	30	31	32	32
126	4	30	32	32	32
127	4	31	32	32	32
128	4	32	32	32	32
129	4	32	32	32	33
130	4	32	32	32	34
131	4	32	32	33	34
132	4	32	32	34	34
133	4	32	33	34	34
134	4	32	34	34	34
135	4	33	34	34	34
136	4	34	34	34	34
137	4	34	34	34	35
138	4	34	34	34	36
139	4	34	34	35	36
140	4	34	34	36	36

For Logs longer than 40', the NWLRAG rules use a standard taper rule to determine the "top" diameter of the segments other than the top segment.
The basic rule allows for 1" of taper per 10' of length.

The Taper Table is shown below:

Total	Butt		Top
Length	Length	Top	Length	Top
41	20	Top+2"	21	0
42	20	Top+2"	22	0
43	21	Top+2"	22	0
44	22	Top+2"	22	0
45	22	Top+2"	23	0
46	22	Top+2"	24	0
47	23	Top+2"	24	0
48	24	Top+2"	24	0
49	24	Top+2"	25	0
50	24	Top+2"	26	0
51	25	Top+2"	26	0
52	26	Top+2"	26	0
53	26	Top+2"	27	0
54	26	Top+2"	28	0
55	27	Top+2"	28	0
56	28	Top+2"	28	0
57	28	Top+2"	29	0
58	28	Top+3"	30	0
59	29	Top+3"	30	0
60	30	Top+3"	30	0
61	30	Top+3"	31	0
62	30	Top+3"	32	0
63	31	Top+3"	32	0
64	32	Top+3"	32	0
65	32	Top+3"	33	0
66	32	Top+3"	34	0
67	33	Top+3"	34	0
68	34	Top+3"	34	0
69	34	Top+3"	35	0
70	34	Top+3"	36	0
71	35	Top+3"	36	0
72	36	Top+3"	36	0
73	36	Top+3"	37	0
74	36	Top+3"	38	0
75	37	Top+3"	38	0
76	38	Top+3"	38	0
77	38	Top+3"	39	0
78	38	Top+4"	40	0
79	39	Top+4"	40	0
80	40	Top+4"	40	0

Total	Butt		Mid		Top
Length	Length	Top	Length	Top	Length	Top
81	26	Top+5"	27	Top+2"	28	0
82	26	Top+5"	28	Top+2"	28	0
83	27	Top+5"	28	Top+2"	28	0
84	28	Top+5"	28	Top+2"	28	0
85	28	Top+5"	28	Top+2"	29	0
86	28	Top+5"	28	Top+3"	30	0
87	28	Top+5"	29	Top+3"	30	0
88	28	Top+5"	30	Top+3"	30	0
89	29	Top+5"	30	Top+3"	30	0
90	30	Top+5"	30	Top+3"	30	0
91	30	Top+6"	30	Top+3"	31	0
92	30	Top+6"	30	Top+3"	32	0
93	30	Top+6"	31	Top+3"	32	0
94	30	Top+6"	32	Top+3"	32	0
95	31	Top+6"	32	Top+3"	32	0
96	32	Top+6"	32	Top+3"	32	0
97	32	Top+6"	32	Top+3"	33	0
98	32	Top+6"	32	Top+3"	34	0
99	32	Top+6"	33	Top+3"	34	0
100	32	Top+6"	34	Top+3"	34	0
101	33	Top+6"	34	Top+3"	34	0
102	34	Top+6"	34	Top+3"	34	0
103	34	Top+6"	34	Top+3"	35	0
104	34	Top+6"	34	Top+3"	36	0
105	34	Top+6"	35	Top+3"	36	0
106	34	Top+7"	36	Top+3"	36	0
107	35	Top+7"	36	Top+3"	36	0
108	36	Top+7"	36	Top+3"	36	0
109	36	Top+7"	36	Top+3"	37	0
110	36	Top+7"	36	Top+3"	38	0
111	36	Top+7"	37	Top+3"	38	0
112	36	Top+7"	38	Top+3"	38	0
113	37	Top+7"	38	Top+3"	38	0
114	38	Top+7"	38	Top+3"	38	0
115	38	Top+7"	38	Top+3"	39	0
116	38	Top+7"	38	Top+4"	40	0
117	38	Top+7"	39	Top+4"	40	0
118	38	Top+8"	40	Top+4"	40	0
119	39	Top+8"	40	Top+4"	40	0
120	40	Top+8"	40	Top+4"	40	0

Total	Butt		Seg 1		Seg 2		Top
Length	Length	Top	Length	Top	Length	Top	Length	Top
121	30	Top+9"	30	Top+6"	30	Top+3"	31	0
122	30	Top+9"	30	Top+6"	30	Top+3"	32	0
123	30	Top+9"	30	Top+6"	31	Top+3"	32	0
124	30	Top+9"	30	Top+6"	32	Top+3"	32	0
125	30	Top+9"	31	Top+6"	32	Top+3"	32	0
126	30	Top+9"	32	Top+6"	32	Top+3"	32	0
127	31	Top+9"	32	Top+6"	32	Top+3"	32	0
128	32	Top+9"	32	Top+6"	32	Top+3"	32	0
129	32	Top+9"	32	Top+6"	32	Top+3"	33	0
130	32	Top+9"	32	Top+6"	32	Top+3"	34	0
131	32	Top+9"	32	Top+6"	33	Top+3"	34	0
132	32	Top+10"	32	Top+6"	34	Top+3"	34	0
133	32	Top+10"	33	Top+6"	34	Top+3"	34	0
134	32	Top+10"	34	Top+6"	34	Top+3"	34	0
135	33	Top+10"	34	Top+6"	34	Top+3"	34	0
136	34	Top+10"	34	Top+6"	34	Top+3"	34	0
137	34	Top+10"	34	Top+6"	34	Top+3"	35	0
138	34	Top+10"	34	Top+7"	34	Top+3"	36	0
139	34	Top+10"	34	Top+7"	35	Top+3"	36	0
140	34	Top+10"	34	Top+7"	36	Top+3"	36	0

Replace those old Clunky Systems and get with the Jetsons. What's not to like?

Call us at 850-532-6206780-833-9870 to schedule a demo or for more information!

TeamViewer Support | TeamViewer Demo | TeamViewer-Mac | TeamViewer-Demo-Mac

Caribou Software Media Links

GMail Integration Privacy Policy

Giving you the Edge in Business

Log Scaling On Android Allegro 3

West Side Scribner (NWLRAG) Log Rule

Replace those old Clunky Systems and get with the Jetsons. What's not to like?